Heeft u reeds eerder besteld bij ons? Dan kan u hieronder uw inloggegevens ingeven om uw account op te vragen.
Bestelt u voor de eerste keer? Dan vragen wij uw basisgegevens. Deze worden bewaard voor een volgende bestelling!
Registreer een nieuwe account★★★★★ - Bijna nieuw, geen tot normale gebruikssporen, 100% in werkende staat. (Grade A+ / A)
★★★★ - Intensere gebruikssporen, kleine krasjes, 100% in werkende staat. Categorie budget (Grade A-)
★★★ - Meerdere intensere gebruikssporen, 100% in werkende staat. Categorie budget (Grade B)
Cisco WAP200 Access Point - Rangebooster
Specifications:
Standards: IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1p (QoS priority), 802.1q (VLAN), 802.1X (security authentication), 802.11i ready (security WPA2), 802.11e ready (wireless QoS), 802.11F (wireless roaming)
Ports: 10BASE-T/100BASE-TX Ethernet, 12V DC power
Buttons: Reset
Cabling type: Unshielded twisted pair (UTP) Category 5
LEDs: Power, PoE, Wireless, Ethernet
Operating system: Linux
Setup/Configuration: Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Management
SNMP version SNMP version 1, 2c, 3
Event logging ● Email notification ● Remote syslog
Web firmware upgrade Firmware upgradable through web browser
Diagnostics: Flash, RAM, LAN, WLAN
Dynamic Host Configuration Protocol (DHCP): DHCP client
Operating Modes Access point: Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode
Wireless Spec/modulation: Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM
Channels Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
External antennas: 2 (omnidirectional) SMA detachable
Transmit power: Transmit power (adjustable) at normal temperature range: ● 802.11b: 18~19 dBm ● 802.11g: 14~15 dBm
Antenna gain in dBi: 2
Receiver sensitivity: 802.11.g: 54 Mbps at -72 dBm, 802.11.b: 11 Mbps at -85 dBm
Security: WEP/WPA/WPA2 WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Access control Wireless connection control: MAC-based
SSID broadcast: SSID broadcast enable/disable
802.1X: IEEE 802.1X support
Wireless client isolation: Wireless client devices can be isolated from each other either within an SSID or between 2 SSIDs
Wireless Security Monitor: Scan and classify wireless devices in the network Report new client and access point joining network and suspicious network events (works together with Cisco WUSB 200, WMP200 or WPC200 business client adapters): ● Intrusion alarms (e.g., rogue client detected, spoofed MAC address) ● Denial-of-service alarms (e.g., duration attack, association table full) ● Vulnerability alarms (e.g., access point is not using encryption, access point is broadcasting SSID) ● Other alarms (e.g., low speed connection)
Quality of Service QoS: ● 4 queues ● Wi-Fi Multimedia (WMM) wireless priority
Dimensions: W x H x D 6.69 x 8.07 x 7.68 in. (170 x 205 x 195 mm)
Unit weight: 0.88 lb (0.4 kg)
Power: 12V 1A DC Input, and IEEE 802.3af compliant PoE
Maximum power draw: 3.36W